|
Brianna Products
VENEER CUTTING JIG!
Only $225.00
The Veneer Cutting Jig is made of
Aluminum and is Powder-Coated. It bolts to the top of your
table saw with four bolts.
Below is a
photograph of the jig attached to a table saw.
Saw is NOT included.
|
Brianna Products
V-GROOVE CUTTING SAW
BLADE!
Only
$275.00
8" diameter - 90° V-Groove Saw
Blade for cutting veneer Points. 40 Razor Sharp Carbide
Teeth. 5/8" Arbor Hole. The body of the blade is over 3/16"
THICK!
These blades are built to last a lifetime!
Similar Blades of this quality cost
$425.00!
Purchase the Veneer Cutting Jig and get
the V-Groove Blade for only $225.00!
Both for
$450.00
Save $50.00!
|
|
CUE MAKER'S SPLICED POINT CUTTER
A Brianna Products Exclusive!
This is a carbide cutter. The cutter is a 90 degree
cutter that is made specifically to
cut out the points on your forearms. This will cut extremely
wide points, over an inch at the widest point. The nice thing
about
this cutter is that it will fit a 1/4 inch router. The
cutter has 2
sharp carbide cutting heads, and it can be sharpened locally
without problems.
Let us take the guesswork out of your tooling needs! Save
your time for building cues!
Knockout Price $79.95
Using cutter to create Veneers |
Tubing - Sold by the Foot
"Clamp like" use to secure veneers & points on
forearm point blanks while glue dries.
$1.50 per ft (99ft or less)
100ft. Box (1.15 per ft.
SAVINGS)
$115
2 Piece Cutters
Knockout Price $79.95
Cuemaker uses these products
 |
